دسته‌بندی نشده

مانیتورهای CONTROL

FJM-WTO-helicopter-protection

Remote Control Monitor

– Power supply of the POK_CC :230 VAC – 16 A – 50 Hz

– Spare batteries (optional) 24 V – 18 Ah

– Connection of the POK_CC : Pluggable connectors IP67 sealed

– Operation modes :

ddManual: control of the movements with the remote control

ddAutomatic: automatic sweeping actioned from external data ddsource (hot spot detection)

– Remote-controlled functions :

ddElevation (proportional control with sweeping option)

ddHorizontal (proportional control with automatic  sweeping ddoption)

– Diffuser (on-off control)

– Valve (open / close)

– Emergency stop

– Configurable functions by learning :

ddElectronic stops

ddAttack position of the monitor

ddParking position of the monitor

ddPosition display (optional)

5802372-3x2-700x467

Part Number:SKA-MRC-0125-W

– Maximum working pressure:PN16

– Material :aluminum alloy

– Surface treatment :polyester coating and hard ddadonization

– Horizontal movement :on 360°

– Horizontal adjustment :motorized and spare hand wheel

– Vertical movement :from +32° to +90°

– Vertical adjustment :motorized and spare hand wheel

– Power supply:24V CC

– Speed:22°/s

– Options: flange, outlet equipment, control system

APF_52_Jan15_Foam_1_JB_700x500

Remote Control Monitor

Unlimited swiveling ranges are available.

   – Horizontal (‘Left/right’): 360°

      (when using DC drives: 330°)

   – Vertical (‘Up/down’) from -90° to +120°

 Both swiveling axles (horizontal and vertical) have self-locking worm gears (except the hand-lever version). Therefore, the monitor cannot be misadjusted by an external force effect.All bearings are enclosed and lubricated for life. Their high-quality workmanship keeps the pivot mountings torsion-resistant  and free from play. Fixed connection for the supply of foam  agent or powder. For this purpose, the version “C” with a central supply line is available (see dashed line). The hose at  the side just has to follow the vertical swiveling movement (‘Up/down’) and will not be compromised by it.All type series are available with nozzles and pipes that allow adjusting the extinguishing agent flow rate even during operation and at full operating pressure.

Nozzles for simultaneous discharge of foam and powder.

 Compact dimensions and low height.

Remote Control Monitor

Part Number:SKA-MRC-0126-W

MONSOON RC 3“ & 4″

Monitor Configuration Fixed Mount
Flow Rate – Monitors 0-2000 gpm (0-7600 l/min)
Operation Energy Source Electric (12/24 vdc)
Monitor Inlet 3 & 4 Inch ANSI 150
Horizontal Control Hand wheel (3 Inch, Injection Molded

Nylon)

Horizontal Movement (degrees) 225 left and right of center
Vertical Control Hand wheel (3 Inch, Injection Molded Nylon)
Vertical Movement (degrees) 45 below to 90 above horizontal
Safety Shutoff No Safety Shutoff
Pressure Relief Valve No PRV
Valve Design Ball Valve (Stainless)
Finish Powder coated Stardust Silver
Certifications CE
Sweep Angle (degrees) Optional

Part Number:SKA-MRC-0127-W

TORNADO RC 2.5″ANSI 150 INLET 2.5″NH MALE

OUTLET ALUMINUM

Weight: 37.000 lbs (16.782 kg)

Monitor Configuration Fixed Mount
Flow Rate – Monitors 0-500 gpm (0-2000 l/min)
Operation Energy Source Electric (12/24 vdc)
Monitor Inlet 2.5 Inch ANSI 150
Monitor Outlet 2.5 inch (65mm)
Horizontal Control Hand wheel (3 Inch, Injection Molded

Nylon)

Horizontal Movement (degrees) 185 left and right of center
Vertical Control Hand wheel (3 Inch, Injection Molded

Nylon)

Vertical Movement (degrees) 45 below to 90 above horizontal
Safety Shutoff No Safety Shutoff
Pressure Relief Valve No PRV
Valve Design Ball Valve (Stainless)
Finish Powder coated Stardust Silver
Certifications CE
Sweep Angle (degrees) Optional

Remote Control Monitor

Control commands to be entered optionally through:

– fixed operating panels,

– portable operating panels with a flexible cable connection

– portable radio transmitters,

– existing operating panels at the user ‘which do have a CAN bus interface.

– Variable speeds of the monitor’s swiveling movements.

– Position transmission by high-resolution ,IP 67-protected analogue absolute encoder.

– Jet and flow rate adjustment including the option to dial up to five pre-set values.

– Automatic, customer-programmable obstacle avoidance.

– Automatic, customer-programmable oscillating operation.

– Integration of water supply valves.

-Automatic folding into working or rest position and vice versa.

– Components tested for electromagnetic compatibility (EMC) and vibration/shock resistance.

– Protection class IP 67.

*Highlights of the CAN bus control systems.

maxresdefault