ARC flash face shield

• 10 cal/cm2 ATPV rating when used with the included chin cup
• 8 cal/cm2 without the chin cup
• 7.5’’ x 20’’ viewing area
• Extra light tint
• 0.06’’ thick
• Absorbs >99.9% of harmful UV radiation
• Resistant to fogging
• AS1000 Series
Standard: ASTM F2178 specification

ARC flash head & face protection

• Has an ATPV rating of 10 cal/cm2
• Lens provides a 7.5” x 20” veiwing once with an extra light
• With cotton canvas storage bag
• AS1000 HAT

Standard: ASTM F2178 specification

ARC Flash kit

• ARC flash coat
• Bib Overalls
• Pro Hood
• Hard Hat
• Safety Glasses
• SK Bag
• Solutions available for 8-100 cal/cm2
Standard: ASTM F2178 specification

Dielectric Footwear

51509
• 100% waterproof, 2 Buckles, made from premium grade ozone resistant rubber. Fabric lining for easy donning and doffing
• 100% tested to 20KV
• The sole has a durable construction with non-skid bar tread outsole 21406
• 100% waterproof made from ozone-resistant rubber.
• Fabric lining allows for easy removal. Outsole has nonskid bar treads.
• Overshoe boots are full cut and have an attached nonmetallic buckle.
Standard: ASTM F1117 & ASTM F1116

9726

• Dielectric boots contain 200 joule epoxy coated steel toe
• Extra shin protection, cut-off line to make boot shorter
• Polyester lining is comfortable, durable and washable
• Fuel & oil resistant vulcanized rubber sole for inimical enviroment
• Slip resistance outsole and excellent abrasion resistant
• Resistant to hot contact 300°C for 60 seconds
• For workers that require electric protection in work enviroments with high voltage hazards

Standard: CSA Z195-09/ ASTM F2413-1, CSA Class #1 Steel Toe only,

CSA Omega – Electic Shock Resistant 18kV, ASTM F1117-03,

Tested individual boots at 10kV (wet) or 37kV (dry),

AS/NZS 2210.3:2009, E / HRO, EN ISO 20345:2011, SB / E / HRO / SRA

Dielectric E boot
• DIELECTRIC E Boots (safety toe cap)
• Electrically insulated boots that protect workers from risks of pace
voltage when there is a line-to-ground voltage fault during an
intervention on alternative current 1000V nominal voltage power
supply network
• Made of dielectric rubber
• Individually tested
Standard: EN 50321 class 0, Individually tested at 10 000V,

EN ISO 20345 SBE HRO SRC Basic requirements (SB)

Heel energy absorption (E) Contact heat resistance (HRO), EN 13287

Sole slip resistance (SRC) : – Ceramic floor and steel floor

• Heavy duty canvas duck
• Double stitched at stress points for extra durability
• Snap hook for hanging on work belts
• Tapered gussets with wide opening tops for easy insertion
• Dimensions: 9’’ x 18’’
• For 16’’ Gloves

ILPG3S
• Leather Protector Gloves should always be worn over Insulating
Rubber -Gloves to provide the needed mechanical protection
against cuts, abrasions and punctures.
• Manufactured from top grain goat skin

PRO-wear, ARC Flash gloves
• ATPV rating of 40 cal/cm2
• Sewn with Nomex thread
• All are made with FR material
• 14” long, dute cut style
• Available from 8-100 cal/cm2

Standard: ASTMF969

E014B
Rubber Insulated
These gloves are 14 inches and come in size 10 and in black coloring
1000AC minimum use voltage
E014B

Standard: ASTM D120

E216B
• Insulating rubber glove;
• Class 2;
• 16” long;
• For use up to 17000 volts;
• E216B

Standard: ASTM D120

E416
• Class 4 lineman’s insulating rubber gloves
• 16” lenght with straight cuff
• Type I natural rubber
• E416B

Standard: ASTM D120

Switching board matting
• Made from high quality rubber,
• 1/4 thick and tested to 20kV
• Corrugated surface acts as a safety tread while reducing the
possibility of metal particles becoming embedded.
• Class 2 maximum use voltage 17,000VAC.
• 25 yard rolls
• (M36-2)

Standard: STM D178, Class 2

Electrosoft gloves Class 00
Part # 2091903
Its natural latex base offers high dielectric characteristics.
It must be used with a leather overglove.
The longer length helps to protect the forearm from dielectric risks.
For electrical work with a maximum voltage of 500 volts
Standard: EC Category PPE: 3, Quality Assurance: ISO 9001 / 2000, EC Attestation: EC Attestation,
EC Attestation Number: 0077/016/078/09/93/0001 – EXT 02/10/06

Electrosoft gloves Class 0
Part # 2091906
Its natural latex base offers high dielectric characteristics.
It must be used with a leather overglove.
The longer length helps to protect the forearm from dielectric risks.
Ergonomic shape and lightly powdered interior making the gloves
easy to slip on/off.
For electrical work with a maximum voltage of 1000 volts
Standard: EC Category PPE: 3, Quality Assurance: ISO 9001 / 2000, EC Attestation: EC Attestation,
EC Attestation Number: 0077/016/078/09/93/0001 – EXT 02/10/06

Electrosoft gloves Class 1
• Part # 2091911
• Beige natural latex insulating glove
• Provides additional softness on the inside to put on & take off easily.
• It must be used with a leather overglove.
• For electrical work with a maximum voltage of 7500 volts
• The thickness of it is 1.5mm for sturdy usage.
Standard: EC Category PPE: 3, Quality Assurance: ISO 9001 / 2000, EC Attestation: EC Attestation,EC Attestation Number: 0077/016/078/09/93/0001 – EXT 02/10/06

Electrosoft gloves Class 2
• Part # 2091921
• With 2.3 mm thickness, this glove can protect you from 1700 volts.
• The natural latex base offers high di electric characteristics.
• Ergonomic shape and lightly powdered interior making the gloves
easy to slip on/off.
• It must be used with a leather overglove.
• The longer length helps to protect the forearm from dielectric risks.
Standard: EC Category PPE: 3, Quality Assurance: ISO 9001 / 2000, EC Attestation: EC Attestation,
EC Attestation Number: 0077/016/078/09/93/0001 – EXT 02/10/06

Electrosoft gloves Class 3
• Part # 2091931
• Beige natural latex insulating glove
• Its anatomical shape ang lightly powdered interior make it easier
to slip the glove on and off.
• It must be used with a leather overglove.
• For electrical work with a maximum voltage of 26500 volts.
• 2.9 mm thickness ensures good dexterity.
Standard: EC Category PPE: 3, Quality Assurance: ISO 9001 / 2000, EC Attestation: EC Attestation,

EC Attestation Number: 0077/016/078/09/93/0001 – EXT 02/10/06

Electrosoft gloves Class 4
• Part # 2091941
• Its anatomical shape ang lightly powdered interior make it easier to
slip the glove on and off.
• Its thickness 3.44 mm ensures good dexterity while offering protection
up to 36000 volts of use.
• It must be used with a leather overglove.
• Its natural latex base offers high dielectric characteristics.
Standard: EC Category PPE: 3, Quality Assurance: ISO 9001 / 2000, EC Attestation: EC Attestation,

EC Attestation Number: 0077/016/078/09/93/0001 – EXT 02/10/06

ELSEC gloves
Insulating gloves ELSEC are applicable for electrical
purposes exclusively as the basic personal protective
tool for live working at voltages up to 1 kV or as
additional protective measure for live working at voltages exceeding 1 kV.
• resistant to acid
• resistant to oil
• resistant to ozone
•Class 00\RC-3\RC
•Max working Voltage 500V-26.5 KV
• EN 60903:2003 + AC2:2005

Static discharge stick
• Design to safely remove the static charge after deenergizing
include aBrass Alloy U hook
• 20817
Standard: ASTM F711

Insulated rescue hook
Used to withdraw an injured worker out of a hazardous area
Featuring a foam filled, fiber glass reinforced handle for superior
electrical insulation
Coated heat treated body hook with an 18” opening
Standard length of 6 & 8 hectares
Standard: ASTM F1117 and ASTM F1116

Voltage detector kit
• Self testing voltage detector use to verify live or de-energized conductor
• Tester indicate the percentage of voltage with an extra bright LED light and a distinctive audible signal
• Tester 240V to 230KV

Electric Resistance Carpet

• 2ml
Standard IEC 60243-11998 38kv
Standard IEC 61111:2002 20Kv
Color : Gray
• 4ml
Standard IEC 60243-11998 47kv
Standard IEC 61111:2002 40Kv
Color : Green
• 6ml
Standard IEC 60243-11998 54kv
Standard IEC 61111:2002 50Kv
Color : Cream

PRO-HOOD® ARC FLASH PROTECTION HOODS

8 cal/cm2 to 100 cal/cm 2
* ATPV ratings 8 cal/cm2 to 75 cal/cm 2
* hoods are made from arc flash resistant material 100 cal/cm 2
* hood is made from TuffWeld® and q/9® material layers Sewn with Nomex® thread Arc rated 10” x 20” anti-fogging replaceable lens Slotted bracket Hook and pile tabs to attach Salisbury’s PRO-AIR™ belt mounted compact air system One size fits all.
Hard hat not included.
Meet current ASTM F2178 and NFPA 70E standards and the flammability requirements for ASTM F1506.
All PRO-HOODs are CE 0120 certified.
Orange color available by special order

NEW Optional Universal Inner Anti-Fog Lens
(see page 12 for more information)
NEW Optional Integrated Air Flow Hood System
(see page 17 for more information)
IMPROVEMENTS:
NEW Design and Cut on FH8BL. FH11BL & FH20BL
Clearer Lens available on FH8BL, FH11BL, FH20BL, FH31RB,
FH40GY, FH40GYLT, and FH55GY

Cat. No.
Description
FH8BL  IMPROVED 8 cal/cm2, navy blue
FH11BL IMPROVED 12 cal/cm2, navy blue
FH20BL IMPROVED 20 cal/cm2, navy blue
FH31RB IMPROVED 31 cal/cm2, royal blue
FH40GY IMPROVED 40 cal/cm2, gray
FH40GYLT IMPROVED 40 cal/cm2, lighter weight, gray
FH55GY* IMPROVED 55 cal/cm2, gray
FH75GY* 75 cal/cm2, gray
FH100TW* 100 cal/cm2, khaki, TuffWeld®
Add suffix “-C” to include integrated air flow hood system.
NOTE: Available in orange upon request. Contact your local Salisbury Representative.

ARC FLASH PROTECTION COATS

8 cal/cm2 to 100 cal/cm2
* ATPV ratings 8 cal/cm2 to 75 cal/cm2
* coats are made from arc flash resistant material 100 cal/cm2
* coat is made from TuffWeld® and q/9® material layers Sewn with Nomex® thread

32”long
Nomex® wristlets.
Expansion back for added comfort
Dual stage front closure with high temperature plastic zipper on the 31 – 100 cal/cm2
* coats FR hook & pile storm flap Coats are intended to be used with PRO-HOODS®
Meets current ASTM F1506 and NFPA 70E standards.
All are CE 0120 certified.
Sizes S, M, L, xL, 2xL, and 3xL available from stock
Other sizes and orange color available by special order

ARC FLASH PROTECTION BIB OVERALLS

8 cal/cm
2
to 100 cal/cm2
* ATPV ratings 8 cal/cm2 to 75 cal/cm2
* bib overalls are made from arc flash resistant material
* bib overalls are made from TuffWeld® and Sewn with Nomex® thread Integrated heavy duty suspenders

Relaxed cut for greater mobility
30” inseam
Adjustable hook and pile waist straps
Bib front for added protection
Adjustable gussets on pant cuffs.
Meets current ASTM F1506 and NFPA 70E standards.
All are CE 0120 certified.
Sizes S, M, L, xL, 2xL, and 3xL available from stock
Other sizes and orange color available by special order

Salisbury arc flash كاتالوگ لباسهاى_page21_image28

 ARC FLASH PROTECTION COVERALLS

8 cal/cm2 to 20 cal/cm2
ATPV ratings
Made from arc flash resistant material
Sewn with Nomex® thread
Full cut with set in sleeves
FR hook and pile front closure
30” inseam
Expansion back
2-ply Nomex® wristlets
Hook and pile cuff opening
Meet current ASTM F1506 and NFPA 70E standards.
All are CE 0120 certified.
Sizes S, M, L, xL, 2xL, and 3xL available from stock
Other sizes and orange color available by special order

ARC FLASH PROTECTION PREMIUM COVERALL KITS

 SALISBURY PRO-WEAR® ARC FLASH PROTECTION COVERALL kITS are clothing kits containing arc flash coveralls in an ATPV rating of either 8 cal/cm2 or 12 cal/cm2, an AS1000HAT, an appropriate ATPV rated AFHOOD, ASBAG, SKBAG and safety glasses.

NEW 2-COLOR PRO-WEAR ARC FLASH PROTECTION COVERALL kITS are clothing
kits containing arc flash coveralls in an ATPV rating of either 8 cal/cm2 or 12 cal/cm2 , a NEW AS1200HAT, an appropriate ATPV rated AFHOOD, ASBAG, SKBAG and safety glasses.

Sizes S, M, L, xL, 2xL, and 3xL available from stock. Other sizes and orange color available by special order.

THESE KITS MEET NFPA 70E
HAZARD RISK CATEGORY 2.

SALISBURY ADVANTAGE
LARGEST SELECTION OF KIT
OPTIONS AVAILABLE.

PRO-WEAR® PERSONAL PROTECTION EQUIPMENT KITS

 SALISBURY PRO-WEAR® ARC FLASH PERSONAL PROTECTION EqUIPMENT kITS ARE AVAILABLE IN ATPV RATINGS OF 8, 12, AND 20CAL/CM2. These kits contain arc flash coat, bib overalls, PRO-HOOD®, hard hat, SKBAG, and safety glasses.

NEW 2-COLOR 8 CAL/CM2 AND 12 CAL/CM2PRO-WEAR ARC FLASH PROTECTION PPE kITS AVAILABLE.
Sizes S, M, L, xL, 2xL, and 3xL available from stock. Other sizes and
orange color available by special order.

31 cal/cm2
hrc 3 t SALISBURY PRO-WEAR® ARC FLASH PERSONAL PROTECTION EqUIPMENT
kITS ARE AVAILABLE IN AN ATPV RATING OF 31 CAL/CM2. This kit contains
an arc flash coat, bib overalls, PRO-HOOD®, hard hat, SKBAG, and safety glasses.
Sizes S, M, L, xL, 2xL, and 3xL available from stock. Other sizes and orange
color available by special order.
THIS KIT MEETS NFPA 70E HAZARD RISK CATEGORY 3. PRO-WEAR® PERSONAL PROTECTION EQUIPMENT KITS

PRO-WEAR® PERSONAL PROTECTION EQUIPMENT KITS

40 cal/cm2    hrc 4

 SALISBURY PRO-WEAR® ARC FLASH PERSONAL PROTECTION EqUIPMENT kITS ARE AVAILABLE IN AN ATPV RATING OF 40 CAL/CM2. This kit contains an arc flash coat, bib overalls, PRO-HOOD®, hard hat, SKBAG, and safety glasses.

PRO-WEAR® PERSONAL PROTECTION EQUIPMENT KITS

55 – 75 cal/cm2         hrc 4

t SALISBURY PRO-WEAR
®
ARC FLASH PERSONAL PROTECTION EqUIPMENT
kITS ARE AVAILABLE IN AN ATPV RATING OF 55 AND 75 CAL/CM
2
*. These
kits contains an arc flash coat, bib overalls, PRO-HOOD®, hard hat, SKBAG,
and safety glasses.
Sizes S, M, L, xL, 2xL, and 3xL available from stock. Other sizes and orange
color available by special order.
THESE KITS MEET NFPA 70E
HAZARD RISK CATEGORY 4.

PRO-WEAR® PERSONAL PROTECTION EQUIPMENT KITS

100 cal/cm2 hrc 4

u SALISBURY PRO-WEAR®ARC PERSONAL PROTECTION EqUIPMENT KITS ARE AVAILABLE IN AN ATPV AN RATING OF 100 CAL/CM2. This kit contains an arc flash coat, bib overalls,PRO-HOOD®, hard hat, SKBAG, and safety glasses. Made from TUFFWELD®.TUFFWELD offers inherent FR protection with a high level of comfort anddurability. Exceptional lightweight comfort with superb wicking so you can stay cooler and drier even under demanding conditions.
Sizes S, M, L, xL, 2xL, and 3xL available from stock. Other sizes and orange
color available by special order.
THIS KIT MEETS NFPA 70E
HAZARD RISK CATEGORY 4.

ARC FLASH AND FLAME RESISTANT HI- VIS VEST & RAIN SUITS 

5 cal/cm2- 7 cal/cm2- 9 cal/cm2       NEWhrc 2

SALISBURY’S HI-VIS VEST has an ATPV rating of 5 cal/cm2 and is constructed from a flame retardant mesh fabric and provides cool comfort. The vest’s fabric has a 40 xexon Rating, which is the highest visibility available. No other fabric beats it! The vest is available in hi-vis orange or hi-vis yellow. A 2” silver flame resistant 3M™ Scotchlite™ reflective material trim is sewn over each shoulder and around the entire garment. The vest is available in Class 2 ANSI standard compliant or
CSA standard compliant. Meets ASTM F1506 and ANSI/SEA 107-2010.

THE ULTIMATE BACK PACK

EVERYTHING YOU NEED IN ONE CONVENIENT LIGHTWEIGHT BACkPACk.
The SALISBURY SKBACKPACK is specifically designed to hold virtually everything
from tools to full Personal Protective Equipment (PPE) kits. Specialized reinforced compartments with flap closures are located on both sides of the pack and include flexible slots designed specifically to keep your hand tools in place.The individual compartments make finding the right tool a snap. The backpack can even be personalized to hold your very own PPE kit – clothing, head and face protection, insulated tool kit, and much more. The interior includes extra large compartments to hold voltage detectors or other specialized tools, as well as numerous smaller partitions. There is even a specific area for first aid items.
The rugged SK BACKPACK is manufactured from water resistant reinforced fabric, which is resistant to cuts and abrasion. The adjustable heavy duty straps are wide and padded making it very comfortable to wear regardless of the load. The Sk BACkPACk includes an exterior hard hat strap, D-ring’s, and universal snap hook. Even a built-in integrated handle for those on the move.